EASY S

EASY S

Manual/Fully automatic terminating machine for IDC Connector.

MAIN FEATURES

  • Free and crossing wires as well as loops or one-side wire terminations are producible
  • Min wire length = 150 mm (Loops), 55 mm (Free wire)
  • Simultaneous processing connectors with different number of ways, coding versions etc.
  • Max Production configuration: 44 contact positions for Rast 2,5; 24 contact positions for Rast 5
  • Connector loading system without machine stop
  • Terminating Unit with fine adjustment termination height
  • Test device for the correct wire position in the connector
  • Continuity Test (optional)
  • Coding station (optional)
  • Test device for the correct key cutting (optional)
  • Selective destroying unit of bad harness (optional)
  • User friendly HMI based on Windows O.S.
  • Internet connection for remote assistance
  • Conveyor guide for good harnesses
  • Expulsion of bad harnesses
  • CE conformity

TECHNICAL DATA

  • Power supply: 3P + N + PE 400 VAC, 50 Hz, 7 kW
  • Air supply: 7 bar
  • Air consumption: approx. 150 Nl/min
  • Noise level < 80 dB(A)
  • Dimensions: 4350 × 3500 × h 2000 mm (h 2200 mm safety shield open)
  • Weight: approx 1000 kg

CRIMP MODULE – Option

  • Max 3 Crimping units, with CFA
  • Wire Feeding up to 6 different wires, length freely programmable
  • Min. wire length = 60 mm (Free / Crimped / Stripped wires)
  • Max. wire length = 1500 mm (Free / Crimped / Stripped wires)
  • Carrier strip chopper (optional)
  • Paper take-up (optional)
  • Sleeve Insertion Unit (optional)
  • Seal Station Unit (optional)
  • Dimensions: 1300 × 2300 × h 2800 mm (safety shield open)
  • Weight: approx. 1000 kg